Details For Operation Skill:
Step1: Prep all of the nails by pushing back and removing the cuticle. (This step is very important - the most common cause of lifting is cuticle left on the nails.) Gently remove it and brush off dust.
Step2: Apply one layer of RONIKI PH bond.
Step3: Apply one layer of RONIKI primer, no need to cure.
Step4: Apply a thin layer of RONIKI base coat. Cure under your UV/LED Lamp according to the lamp instructions. (Usually 90s if 36w uv lamp, 30s if 36w led lamp)
Step5: Apply a thin layer of RONIKI Shell Gelpolish, be sure to cover the entire nail. Cure under your UV/LED Lamp according to the lamp instructions. (Usually 120s if 36w uv lamp, 30s if 36w led lamp) Each layer will leave a sticky residue, this is normal, do not remove at this stage as this will help the next layer to stick to the nail.
Step6: Repeat step 5. Make sure that you coat the tip of the nail all the way to the edge.
Step7: Apply a layer of RONIKI soak off top coat, cure under your UV/LED Lamp according to the lamp instructions. (Usually 120s if 36w uv lamp, 60s if 36w led lamp)
Step8: Remove any sticky residue with at least 98% isopropyl alcohol.
Welcome to our company website, thank you for your letter, we will give you a reply in the first time, would you please leave your information and contact way!